Radio Shack CT-600 - Manual (Page 17)

17
BASIC OPERATION
TURNING THE PHONE ON AND
OFF
Note: Extend the antenna fully during a call. Avoid
unnecessary contact with the antenna when the
phone is turned on.
The phone must be turned on before you can make
or answer calls. To turn on the phone, hold down
(below and to the bottom left of the display) until
the phone beeps. The phone performs a short self-
test, then it briefly displays the active phone number
(see “Selecting the Active Phone Number” on
Page 40). The phone is ready to use when the sig-
nal strength and battery charge bars appear.
To turn off the phone, hold down until the phone
beeps.
MAKING A CALL
1. Open the flip cover. Use the number keys to en-
ter the phone number you want to dial. Include
the area code, if necessary.
Note: If you make a mistake, repeatedly press
to delete digits one at a time, or hold down
to clear all digits.
PWR
PWR
CLR
CLR
17-1105.fm Page 17 Wednesday, July 21, 1999 11:06 AM