Radio Shack CT-600 - Manual (Page 61)

61
Before using data mode:
• Be sure your phone is on, and that the battery
has enough charge for the duration of your data
call.
• Be sure that you are receiving a strong signal
(see the signal strength indicator on your dis-
play).
• Be sure that your computer is on, and is fitted
with a data card.
Connect a data cable (not supplied) to your phone.
DATA CARD CONNECTED appears. During a call
with the data cable connected, the phone displays
DATA CALL .
During a data call, only operates; the micro-
phone and earpiece also do not operate.
Important! When you are in the data mode, do not
turn off the phone. Do not move the phone, or use it
in a moving vehicle (data could be lost if you move
from one cellular cell to another).
To turn off the data mode, simply disconnect the
data cable.
DATA CARD REMOVED appears.
END
17-1105.fm Page 61 Wednesday, July 21, 1999 11:06 AM