Raymarine FishFinder L265 - Manual (Page 63)

58
Once the Sidelooker feature is turned on, the FishFinder uses two range
settings: one for the standard displays, and a second for just the
Sidelooker feature. The menu item shown here sets the range for
just the
Sidelooker. (This will not change the range setting for the other display
pages.)
The range for the Sidelooker uses the Manual setting only. Select the
range you want to use. The maximum range of the Sidelooker transducer
is 150 ft or 45 meters.
Press the < arrow on the Page control pad to move to the next menu item.
This menu item allows you to set the sensitivity for the Sidelooker feature
only. (This will not change the sensitivity setting for the other display
pages.) Choose Auto or Manual sensitivity. If you choose Manual
sensitivity, use the
< and > arrows on the Page control pad to adjust the
sensitivity.
At this point, you can press the CLR button to go back to the Sidelooker
display.
Setup Instructions
Fig. 4-10
Sidelooker
Range Settings
Fig. 4-11
Sidelooker
Sensitivity Settings