Resetting the unit to factory defaults, Default settings – Raymarine FishFinder L265 User Manual
Page 64
59
If you press the
< arrow on the Page control pad, the unit will move to
the remaining menu items – zoom, frequency, and log reset. The zoom
and frequency settings are for the normal displays – they will not change
the Sidelooker feature. The log reset menu will operate normally.
Resetting the Unit to Factory Defaults
It is easy to reset all of the settings on the FishFinder at the same time.
When the unit is off, press the
PWR
and
CLEAR
buttons at the same time.
(Release the buttons as soon as the FishFinder begins to operate.) All of
the settings will be reset to the values listed below, and the trip log will be
reset to zero.
Default Settings
When the FishFinder is new, it uses a number of preset “default” settings.
Here is a list:
Function
Default - US model
Default - Europe
model
Range
Auto
Auto
Sensitivity
Auto
Auto
Chart Speed
3 (fast)
3 (fast)
Zoom
Auto/x4
Auto/x4
Frequency
Dual 200 kHz
Dual 200 kHz
Simulator
Off
Off
Fish symbols
On
On
White line
On
On
Sidelooker
Off
Off
Depth units
FT (feet)
M (meters)
Shallow alarm
Off
Off
Fish alarm
Off
Off
Deep alarm
Off
Off
Buzzer
On
On
Setup Instructions