Drive cup down with spacer and insert snap ring, Position second yoke on cross. repeat steps 2 to 6, Maintenance – Rhino Mounts NITRO FN20 User Manual
Page 150
Advertising
MAINTENANCE
FN20/FN14 NITRO 02/10
Maintenance Section 5-10
© 2010 Alamo Group Inc.
MAINTENANCE
5.
Drive cup down with spacer and insert snap
ring
6.
To loosen cross, strike yoke arm and check
cross for free rotation
7.
Position second yoke on cross. Repeat
Steps 2 to 6.
Grease Kit after assembly is completed.
Advertising
This manual is related to the following products: