Working with videocassettes, Erase protection safety tab, Record and playback speeds and times – RCA CC6151 User Manual

Page 24: And times, Videocassettes

Advertising
background image

22

Videocassettes

Recording Time

Cassette

SP

SLP

TC-20

20 Min.

60 Min.

TC-30

30 Min.

90 Min.

TC-40

40 Min.

120 Min.

Make sure you select good quality tapes for your camcorder. Use of poor quality tapes
or tapes that have been damaged or mishandled can contaminate the video heads,
resulting in a snowy picture or no picture at all during playback. Because there is no
control over the type of tape purchased or rented by consumers, head cleaning is not
covered under warranty. It is considered normal maintenance.

The automatic head-cleaning system minimizes the need for accessory cleaners or
cleaning by a Service Center. This system is activated whenever you insert or remove
a cassette.

Erase Protection – Safety Tab

You can use your videocassettes over and over again. To erase a previous recording,
just record over it.

Recording and Playback Speeds and Times

The camcorder records and plays back in standard speed (SP) or extended play
(SLP). Select the recording speed by pressing and holding the SP/SLP button.
The selected speed is displayed in the viewfinder. Listed below are the
maximum SP and SLP recording times for popular VHS-C cassettes.

• SP – Standard play provides the

best picture (less picture noise),
but the shortest recording time (20
minutes with a TC-20 tape).

• SLP – Extended play provides

three times the recording time as
SP (60 minutes with a TC-20 tape).
SLP has slightly more picture
noise than SP in normal playback.
This might not be noticeable.

Safety

Tab

A. Remove

B. Cover hole
with vinyl tape or
slide tab to
REC ON to
record over tape.

safety tab or

slide tab to

REC OFF.

Advertising