Service port number, Attaching the shoulder strap, Service port number attaching the shoulder strap – RCA CC6151 User Manual
Page 58: Recording, Service port identification number, Attach the shoulder strap
Recording
56
Cautions: When carrying the camcorder with the shoulder strap, you may find it
convenient to rotate the viewfinder down and slide it to the front. This helps prevent
possible damage to the viewfinder from bumping against your body as you move.
Make sure the shoulder strap is firmly attached before using it to carry the camcorder.
Service Port Identification Number
The service port, or JLIP connector is used by
authorized servicenters.
Attach the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camcorder from your
shoulder and – when you are ready to shoot – bring the camcorder to shooting position
in one quick movement.
Keeper
BACK
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
MENU END
OFF
OFF
ON
07
OFF
To Attach the Shoulder Strap
1. If the strap keeper is over a
double section of the strap,
slide the strap keeper off
the end of the strap.
Replace the keeper on
the strap between the
buckle and the end
of the strap as
shown.
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
Buckle Keeper
Attachment
Rings
3. Thread the end of the strap back
through the keeper and buckle making
sure it is threaded under the outer
strap. Make sure the strap is not
twisted.
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
5. Adjust the shoulder strap to the
desired length.
6. Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.