Ricoh Aficio 3232C - Manual (Page 121)

Accessing User Tools (Copier / Document Server Features)
107
5
Accessing User Tools (Copier / Document
Server Features)
This section is for key operators in
charge of this machine. With User
Tools can change the machine's de-
fault settings.
Note
❒ Be sure to exit User Tools and re-
turn to the initial copy display af-
ter all settings are finished. This
section describes system settings
you can set for the copier function.
❒ The selected key is highlighted.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the
{{{{Clear
Modes
}}}} key is pressed.
Reference
For details, see “Changing Default
Settings” in “User Tools (System
Settings)”, General Settings Guide.
Changing Default Settings
AAAA
Press the
{{{{User Tools/Counter}}}} key.
The User Tools main menu ap-
pears.
BBBB
Press [Copier / Document Server Fea-
tures]
.
The Copier / Document Server
Features menu is displayed.
CCCC
Select the menu you want to set.
The setting display for each menu
is displayed.
Reference
See p.99 “User Tools Menu
(Copier / Document Server Fea-
tures)”.
DDDD
Change settings by following the
instructions on the display panel,
and then press [OK].
Exiting User Tools
AAAA
After changing default settings,
press [Exit] on the User Tools main
menu.
Changes to User Tools are com-
plete, and the machine is ready to
copy.
Note
❒ You can also exit User Tools by
pressing the
{{{{User Tools/Coun-
ter
}}}} key.
ZFLS110N
ThemisC1_AE_Copy_F_FM.book Page 107 Tuesday, June 21, 2005 9:09 PM