Ricoh Aficio 3232C - Manual (Page 44)

Copying
30
2
BBBB
Press [Edit / Colour Creation].
CCCC
Press [Colour Creation].
DDDD
Press [Convert Colour].
EEEE
Select any one item from [Conver-
sion 1]
to [Conversion 4].
FFFF
Select the colour to be converted.
GGGG
Select the new colour to be con-
verted.
Note
❒ You can adjust the density of
each colour in 4 levels.
❒ When you want to change the
converted colour, press from
[Conversion 1]
to [Conversion 4]
and make the selection again.
❒ When changing between more
than two colours, repeat steps
E
to
G.
Selecting from [User Colour]
A Press [User Colour].
B Select from the registered col-
ours, then press [OK].
HHHH
After selecting all the colours to
be converted, press [OK].
IIII
Press [OK] 3 times.
JJJJ
Place the originals, and then press
the
{{{{Start}}}} key.
Erase Colour
You can erase a certain colour in the
image of the original.
Note
❒ It is possible to select up to 4 col-
ours.
❒ The width of the colour to be delet-
ed can be adjusted in 5 levels. If the
colour width is set to “Wider” and
red has been specified, colours
which are close to magenta or or-
ange, will also be deleted. The col-
our width can be adjusted in the
“User Tools”. See p.120 “Colour
Sensitivity”
AAAA
Press [Edit / Colour Creation].
BBBB
Press [Colour Creation].
CCCC
Press [Erase Colour].
DDDD
Select the colour to be erased.
Note
❒ You can cancel the selection by
pressing the selected (highlight-
ed) key.
❒ You can erase 4 colours at once.
ThemisC1_AE_Copy_F_FM.book Page 30 Tuesday, June 21, 2005 9:09 PM