Roland ATELIER AT-300 - Manual (Page 110)

108
Various Other Settings
You can prevent rhythm tempos from switching automatically
when you switch rhythms.
1. Press the [Utility] button.
2. Press the Menu [ ] or [ ] button to select
“Auto Std Tempo” (Auto Standard Tempo).
3. Press the Value [-] or [+] button to switch the
Auto Standard Tempo “ON” or “OFF.”
To return to the basic screen, press the [Utility] button.
This setting remains stored in memory even while power is
turned off.
You can change the sound that is used for the count played at
the end of the intro with the Intro Countdown function (p. 45).
1. Press the [Utility] button.
2. Press the Menu [ ] or [ ] button to select
“Count Down Sound.”
3. Press the Value [-] or [+] button to select the
type of sound for Intro Count Down.
To return to the basic screen, press the [Utility] button.
You can adjust the volume of the Count Sound, refer to
“Adjusting the Metronome Volume (Metronome Volume)” (p.
111).
Rhythm Settings
Preventing Rhythm Tempos from
Switching Automatically
(Auto Std Tempo)
Setting Descriptions
ON
Switching the rhythm while the rhythm is
stopped automatically changes the tempo
settings to those in the new rhythm.
OFF
When the rhythm is stopped, the tempo
settings are not changed automatically when
the rhythms are changed.
Changing the Sound of the Countdown
(Count Down Sound)
Setting Descriptions
VOICE Human voice count (One, two, three...)
STICK Stick sound count
AT-100-300_e.book 108 ページ ２００８年５月７日 水曜日 午後３時３３分