Changing how the solo voice responds (solo mode), Changing the solo split point, Point (p. 85) – Roland ATELIER AT-300 User Manual
Page 87: Voice will sound (p. 85), They will sound together (p. 85)
85
Using the Lower Keyboard Effectively
Using the Lower Keyboard Effectively
When the Solo voice is assigned to the Upper keyboard or
Lower keyboard, you can specify how the Solo voice will
respond when more than one key is pressed.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to
select “Solo Mode.”
fig.12-05
3.
Press the Value [-] and [+] buttons to change
the setting for Solo Mode.
To return to the basic screen, press the [Utility] button.
When the Solo voice is being played by the Lower keyboard
(i.e., when the Solo [To Lower] button is ON), you can specify
whether the Lower voice and the Solo voice will sound
together (layered), or will sound separately (split).
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to
select “Solo To Lower Mode” (Solo To Lower
Mode).
3.
Press the Value [-] and [+] buttons to switch the
“SPLIT” or “LAYER.”
To return to the basic screen, press the [Utility] button.
This setting is used to determine the Solo Split Point (lower limit
of the playable range of the Solo voice) on the Lower
keyboard to any desired position.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to
select “Solo Split Point.”
3.
Press the Value [-] and [+] buttons to change
the Solo Split Point.
By pressing the Value [-] and [+] buttons simultaneously, you
can restore the default setting (B 4).
To return to the basic screen, press the [Utility] button.
Changing How the Solo Voice Responds
(Solo Mode)
Setting
Descriptions
TOP NOTE
The Solo voice will sound the highest note
that is played for the Solo part.
LAST NOTE
The Solo voice will sound the note that was
most recently played for the Solo part.
POLYPHONIC
The Solo voice will sound all notes that are
played for the Solo part.
Layering the Solo Voice and Lower Voice
(Solo To Lower Mode)
Setting
Descriptions
SPLIT
The parts will sound separately.
LAYER
The Lower voice and Solo voice will sound
together.
Changing the Solo Split Point
Settings
C2 – C7
AT-100-300_e.book 85 ページ ２００８年５月７日 水曜日 午後３時３３分