RCA RCA - Manual (Page 66)

64
Connections
VCR
2-WAY
SPLITTER
CABLE
CABLE BOX
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
TV
CABLE/
ANTENNA
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO R
L/MONO
IN
OUT
TV With Audio/Video Jacks and Cable
Box to Unscramble Pay Channels
Only
This connection assumes:
• You are using a cable box only to unscramble premium
channels.
• Your TV has audio/video input jacks.
This connection provides:
• Stereo sound playback from VCR.
• Recording a scrambled or unscrambled channel through
the cable box while watching an unscrambled channel.
To use this connection, you must have:
• (3) coaxial cables
• (3) audio/video cables
• (1) splitter
If your cable box is remote controllable:
• Position it above the VCR as shown. Make sure not to
block any of the VCR’s ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
• Tune your TV to its video input channel.
• Use of TV•VCR button is not required.
• Use of TV•VCR button is not required. Set the Auto
TV/VCR feature to “OFF.”
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record a scrambled or unscrambled program
and watch another unscrambled program:
1. Begin recording a scrambled or unscrambled program
through the cable box using one of the recording
features.
2. Select an unscrambled channel on the TV.
All scrambled channels must be
viewed through the VCR.
For Cable Box Setup, select ALL
channels. See page 11.
CABLE BOX
VCR'S
SIGNAL
Position Remote-Controllable
Cable Box
VCR
TRANSMITTER