Repair and maintenance – Razor DIRT ROCKET MX500 User Manual

Page 7

Advertising
background image

q

chain and Tire replacement

Tools required: Phillips screwdriver and two (2) 19mm wrenches.

1

Loosen screw and remove

chain guard.

2

Using two 19mm wrenches,

loosen both axle nuts.

3

Push the chain tensioner

down to loosen the chain

and remove the chain from the

wheel sprocket and

motor sprocket. Push and

remove the wheel downward.
Note: Your hands will get

greasy doing this.

4

Install the new chain or

wheel by slipping the chain

around the axle. Slide the axle

into the slots on the frame.

Slide the chain tensioner down

and maneuver the chain onto

the rear sprocket and front

sprocket.

5

Re-attach the chain guard.

Test ride and check. Readjust as

needed.

6

q

replacing the fuse

repaIr anD MaInTenance

warnIng:

To prevent shock, please follow

the instructions accordingly and

do not skip any steps.

1

Remove the seat fairing to lo-

cate the 3 fuse boxes attached

to the batteries.

2

Check all 3 fuses to see if

the fuse(s) have burnt out. If the

fuse(s) is(are) damaged, open

the fuse cover.

3

Remove any fuse that is

damaged or burnt out and

replace with a new one of equal

amperage.

Note:

Amperage is located on

top of fuse.

3 Fuse boxes

Fuse checking cavity

Note: the arrangement of the

hardware sequence:

Right Side (Throttle)
Nut
Washer
Spacer

Left Side (Brake)
Nut
Washer
Spacer

Amperage

number

Advertising