Connecting to ac power, 6 turning on the power, 7 lens adjustments – Runco LIGHTSTYLE LS-7 User Manual
Page 43: Focus, Zoom, Lens shift, Turning on the power, Lens adjustments, Pre l iminar y
Runco LS-7 Installation/Operation Manual
27
PRE
L
IMINAR
Y
Connecting to AC Power
The LS-7 ships with various types of AC power cords. Choose the one that is appropriate
to your locale.
Plug the female end of the power cord into the AC receptacle on the rear of the projector
(AC 100V ~ 240V); see Figure 2-3. Then, connect the other end to your AC power source.
3.6
Turning on the Power
1.
Turn on your source components.
2.
Press the ON
button on the remote control to turn on the LS-7. The LED
flashes green to indicate that it is warming up.
3.
When the projector is ready for use, the LED turns off.
3.7
Lens Adjustments
The LS-7 gives you a great deal of control over the picture size, position and focus.
Focus
To access the motorized lens focus control, do either of the following:
• Press MENU on the remote control. Select Control from the Main Menu, then press
or
to highlight Lens Control. Press
or
to highlight Focus and press ENTER.
• When no menu is present on-screen, press ENTER (
) on the system keypad or
remote control unit.
Then, use the
button to focus the projected image nearer or the
button to focus the
projected image farther away.
Zoom
To access the motorized lens zoom control, do either of the following:
• Press MENU on the remote control. Select Control from the Main Menu, then press
or
to highlight Lens Control. Press
or
to highlight Zoom and press ENTER.
• When no menu is present on-screen, press ENTER (
) on the system keypad or
remote control unit twice.
Then, use the
button to make the picture larger (zoom in) or the
button to make the
picture smaller (zoom out).
Lens Shift
To access the motorized lens shift control, do either of the following:
• Press MENU on the remote control. Select Control from the Main Menu, then press
or
to highlight Lens Control. Press
or
to highlight Lens Shift and press ENTER.
• When no menu is present on-screen, press ENTER (
) on the system keypad or
remote control unit three times.
Then, use the
and
buttons to adjust the vertical lens position or the
and
buttons to adjust the horizontal lens position.
ON
l