Resetting the ns-4102t device – RoyalTek RN5 User Manual
Page 16
Advertising
2.3.
Resetting the NS-4102T Device
In the normal situation, unnecessary to reset your NS-4102T. However, in the event that a
problem cannot be corrected, you may reset the NS-4102T device by the following way：
Hard reset：
•
To do a “Hard reset” Disconnect all cables, including the AC adapter, from your device.
By sliding the hard reset switch on the primary ON/OFF switch on the back side of the device
from OFF to ON position.
16
Advertising