Chapter 3 start to use ns-4102, Turn on the device, Configure system settings – RoyalTek RN5 User Manual
Page 17
Advertising
Chapter 3 Start to Use NS-4102
After fully charging the NS-4102 it is ready to be used. You can now turn it on and proceed to
system settings configuration.
3.1.
Turn on the device
1. Sliding the battery switch to “ON”. (Default status OFF)
After turning on the device, main page will display.
This is also referred to the Favorite page.
3.2.
Configure system settings
If you intend to start using your NS-4102 at once, we recommend that you configure the language
and time zone settings first. The rest of the user preferences can be set up later.
1. Tap “System” in the
right category bar
17
Advertising