RedMax G2500TS - Manual (Page 20)

❲ 20 ❳
9. Maintenance
This saw is equipped with one of the following
low kickback bar/chain combinations:
RedMax Part Number
Bar Size Guide Bar Saw Chain
12inch (30cm) G2512 91VG45X
For replacement, use only above bar and chain,
or the following;
OREGON BAR
12 inch S/N DOUBLE GUARD BAR,
Mount code #A041. (120 SDEA 041)
GB BAR
12 inch MINI LAMINATED BAR (PO12-50CR)
OREGON CHAIN
91VG
■ PERIODICAL CHECK POINTS
1. Cylinder fins
1. Remove the starter case.
2. Remove sawdust between the cylinder fins.
(MA5)
(1) Cylinder fin
2. Fuel filter
1. Using a wire hook, take out the fuel filter from
the feeding port. (MA6)
2. Wash the filter with gasoline.
Replace with new one if clogged with dirt
completely.
When returning the filter, use a pinch not to be
folded the suction pipe.
3. Oil filter
1. With a wire hook, take out the oil filter from
the feeding port. (MA7)
2. Wash the filter with gasoline.
WARNING
WARNING
MA7
MA6
MA5