RoyalTek RTW-1000 - Manual (Page 13)

~ 13 ~
RTW-1000 Operational Manual
on the Pocket PC since the last synchronization are compared and
reconciled.
In the Settings menu of the Microsoft ActiveSync  program you can
define precisely which rules are to be applied during
synchronization.
Call up the program Help (by pressing F1) in order to see the effects
of the corresponding settings.
If the Pocket PC is not recognized as a partner, restricted guest
access is automatically activated that allows, for example, data to
be exchanged.
If this should occur even though there is a registered partnership,
remove the Pocket PC from the charging/synchronization docking
station and switch it off and on again.
Re-insert the Pocket PC in the charging / synchronization docking
station in order to restart the identification process. If this still does
not work, repeat the process and also restart your PC.
If you have changed the device name in the Pocket PC this may be
the cause of this malfunction. Please remember this if you change
the name of the Pocket PC under Start → Settings .
Change the device name of the Pocket PC if necessary, if it does not
correspond with the device name stored by ActiveSync  .
S TEP 4: U SING THE P OCKET PC
O
PERATING THE
P
OCKET
PC
1. Take the Pocket PC out of the docking station.
In order to execute a function or a program,
- Use the stylus to tap Start and then tab your desired operation
on the drop down list.
- Press the program keys of the Pocket PC in order to start the
desired program. The underlying programs can be defined
using Start → Settings → Buttons .
2. Explanations of the operation and functionality of the programs
can be obtained from Start → Help .