Runco CW-50MC - Manual (Page 25)

Command
Name
Full Name RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Description
F FMK SCREEN MASK: ##### ● Displays the current SCREEN MASK setting.
FMKS00 SCREEN MASK: OFF ○ Sets the SCREEN MASK to OFF.
FMKS02 SCREEN MASK: INVERSE ○ Sets the SCREEN MASK to INVERSE (negative-positive inversion)
FMKS03 SCREEN MASK: WHITE ○ Turns ON the WHITE mask.
FMKS04 SCREEN MASK: RED ○ Turns ON the RED mask.
FMKS05 SCREEN MASK: GREEN ○ Turns ON the GREEN mask.
FMKS06 SCREEN MASK: BLUE ○ Turns ON the BLUE mask.
FMKS07 SCREEN MASK: YELLOW ○ Turns ON the YELLOW mask.
FRC FRC: ##### ● Displays the current FRC setting.
FRCS01 FRC: MODE1 ○ Sets FRC to MODE1.
FRCS02 FRC: MODE2 ○ Sets FRC to MODE2
FRCS03 FRC: MODE3 ○ Sets FRC to MODE3
FRP FRESH POSITION ○ Initializes the integrator and SCREEN adjustment values.
FXO AUDIO LEVEL OUT: FIX ○ Selects fixed audio output.
G GHI G. GAIN: *** ○ ○ Adjusts the G. GAIN High.
GLW G. OFFSET: *** ○ ○ Adjusts the G. OFFSET High.
GPI (GET PICTURE DATA) ● ● Gets installer PICTURE data.
GPS (GET POSITION DATA) ● ● Gets installer SCREEN data.
GRA GAMMA: ###### ● Displays the current GAMMA setting.
GRAS01 GAMMA: 2.0 ○ Sets the GAMMA to “2.0’
GRAS02 GAMMA: 1.8 ○ ○ Sets the GAMMA to “1.8’
GRAS03 GAMMA: 2.2 ○ ○ Sets the GAMMA to “2.2’
GRAS04 GAMMA: DRE MID ○ Sets the GAMMA to “DRE MID’ (dynamic range expander)
GRAS05 GAMMA: DRE HIGH ○ Sets the GAMMA to ‘DRE HIGH’
GRAS06 GAMMA: DRE LOW ○ Sets the GAMMA to ‘DRE LOW’
GRAS07 GAMMA: HIGH CNT. ○ Sets the GAMMA to “HIGH CONTRAST’
GSL G. SIDEBAR ADJ. LEVEL: *** ○ ○ Adjusts the GREEN SIDEBAR ADJ.
GSO (GET STATUS OPTION DATA) ● ● Gets OPTION data.
GSS (GET STATUS SETUP DATA) ● ● Gets SETUP data.
GST (GET STATUS) ● ● Gets STATUS.
GWB (GET WHITE BAL DATA) ● ● Gets installer adjust WHITE BALANCE data.
H HPS H. SHIFT ○ ○ Adjusts H. SHARPEN.
HSI V. SHIFT ○ ○ Adjusts V. SHARPEN.
I IDC ID CLEAR ○ Clears the ID.
DS ID No. Set: ** ○ ○ Sets the ID.
IN1 INPUT1 ○ ○ Switches the main screen to INPUT1.
IN2 INPUT2 ○ ○ Switches the main screen to INPUT2.
IN3 INPUT3 ○ ○ Switches the main screen to INPUT3.
IN4 INPUT4 ○ ○ Switches the main screen to INPUT4.
IN5 INPUT5 ○ ○ Switches the main screen to INPUT5.
INP INPUT# ● ● Displays the current input function for the main screen.
INPS01 INPUT1 ○ ○ Switches the main screen to INPUT1.
INPS02 INPUT2 ○ ○ Switches the main screen to INPUT2.
INPS03 INPUT3 ○ ○ Switches the main screen to INPUT3.
INPS04 INPUT4 ○ ○ Switches the main screen to INPUT4.
INPS05 INPUT5 ○ ○ Switches the main screen to INPUT5.
24