Runco CL-500 - Manual (Page 20)

4. Basic Operation
Runco
16
Selecting "ASPECT ratio"
Selecting Video Memory
Setting Menu
■ Select the proper Aspect Ratio according to the
format of signal content. There are four Aspect
Ratio for choice:
■ ANAMORPHIC: 4:3 image is stretched horizontally
to fit the 16: 9 screen. This is for 16:9 DVDs.
■ 4 X 3: The input signal will be scaled to fit 4 : 3
display mode in the center of screen.
■ LETTERBOX: Letter box mode. Image in letter box
format is enlarged to fit 16:9 full screen display and
the upper/lower portion are compressed.
■ VIRTUAL WIDE: 4:3 image is enlarged NON-
linearly in horizontal direction to fit 16: 9 full
screen display.
■ Press the CUSTOM button to recall a setting in the
memory. Each time you press this button, the unit
will recall the settings as follows: MEMORY 1
MEMORY 2 MEMORY 3
OFF.
■ Press the MENU button to turn on /off the on-
screen display menu.
■ Use the ARROW buttons ( / / / ) to select
the menu or to make various adjustments.
■ Press the ENTER button to enter the setting of
items in the menu, or press the EXIT button to
leave and save the setting of items in the menu.
■ For more detail settings, see "5. Menu" on page 18
4X3 LETTERBOX ANAMORPHIC
VIRTUAL WIDE
ENTER
CUSTOM PICTURE
ENTER
EXIT MENU