Installation – Regency B36X User Manual
Page 52
52
Regency Bellavista™ B36X Gas Fireplace
INSTALLATION
Finishing
Trim Top
Finishing
Trim Side
NOTE:
Install the Finishing Trim prior to installing the Flush Louvers.
1)
Install the Finishing Trim sides as shown in the diagram; line up the holes in the
side trim with the holes in the fi rebox side.
2)
Secure with 2 screws per side.
3)
Loosen the 2 screws in the top inside edge of the fi rebox.
4)
Slide the Finishing Trim Top over the Side Trim pieces and
fi t the bottom bracket slots over the screws. Tighten the 2
screws to secure in place.
Finishing Trim
Edge of Unit
OPTIONAL FINISHING TRIM INSTALLATION
FLUSH LOUVERS AND FLUSH PANEL INSTALLATION
To install the top and bottom louvers or fl ush panels:
1) Locate the tabs on louvers/fl ush panels.
2) Line up the tabs on louvers/fl ush panels with the brackets on the
unit.
3) Hook the tabs up over the brackets to attach.
Tabs on Louver/Flush Panel
Bracket on unit for upper
Louver/Flush Panel
Bracket on unit for lower
Louver/Flush Panel
Installation of upper
Louver/Flush Panel
Installation of lower
Louver/Flush Panel