Layering two sounds (layer performance) – Roland RK-300 User Manual
Page 61
61
Performing
By choosing sounds whose names are separated by a “+” (e.g., Piano + Str.1) as a user sound, you can
play two sounds layered. This is referred to as “layered performance.”
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < User > tab.
The screen will show three buttons assigned to user sounds. You can also select these sounds by
pressing tone buttons [1], [2], or [3].
fig.d-userTone1.eps
3.
Touch the button whose tone assignment you want to change.
You can also press one of the INSTRUMENT buttons [1], [2], or [3] to select the button whose tone
assignment you want to change.
fig.d-UserTone2.eps
Layering Two Sounds (Layer Performance)
RK-300_e.book 61 ページ ２００８年９月１０日 水曜日 午後４時６分