Ricoh 450 - Manual (Page 131)

IF YOU CANNOT MAKE COPIES AS YOU WANT
115
3
IF YOU CANNOT MAKE COPIES AS YOU
WANT
Problem Cause Action
Copies are not stapled. There are jammed staples
in the stapler. Remove jammed staples.
See
⇒
P.139 “ e Removing
Jammed Staples”.
Note
❒ After removing jammed
staples, staples might
not be ejected the first
few times you try to use
the stapler.
The number of copies ex-
ceeds the capacity of the
stapler. Check the stapler capacity.
See
⇒
P.49 “Staple”.
Staples are wrongly posi-
tioned. Originals are not set cor-
rectly. Set originals correctly. See
⇒
P.49 “Staple”.
Misfeeds occur frequently. Copy paper size setting is
not correct.
Set the proper paper size.
See
⇒ P.132 “Changing The
Paper Size”.
You cannot combine sever-
al functions. Selected functions cannot
be used together. Refer to the combination
chart. See
⇒
P.108 “Combi-
nation Chart”.