Radio Shack 22-1692 - Manual (Page 7)

7
7. Single Digit Display — indicates city/highway mode,
signal strength, safety alert, and laser alert.
8. SA Indicator — displays when the detector detects
the safety alert signals. (See “Safety Alert System.”)
9. X (X-Band Radar) Indicator — displays when the
detector detects an X-band radar signal.
10. K/Ka (K/Ka Band Radar) Indicator — displays
when the detector detects either a K- or Ka-band
radar signal.
11. VG-2 Indicator — lights when a VG-2 signal is
detected.
12. VOLUME/OFF Control — turns the detector on and
off and lets you adjust the volume.
SAFETY ALERT

SYSTEM
The Safety Alert System employs low-powered transmit-
ters used by some emergency services and road crews
to alert drivers to hazardous road conditions. The system
can indicate stationary, moving, or railroad hazards.
The system has the potential to dramatically decrease
the occurrence of traffic accidents by increasing drivers'
awareness of local road hazards. Having this safety alert
compatible radar/laser detector will ensure that you are
ready to benefit from this system wherever it is in use.
22-1692.FM Page 7 Wednesday, September 11, 2002 8:35 AM