Rolls SS32 - Manual

SS32
Mini Route 3
Signal Switch
ROLLS CORPORATION
SALT LAKE CITY, UTAH
10/08
OPERATION
After proper connections are made, the SS32 will simply connect the indicated
channel (A, B, or C) to the Common jacks by switching between the correspond-
ing selector A,B or C.
INTRODUCTION
The SS32 is a versatile unit that works as a signal distribution device by taking a single
stereo or mono signal input, and switching it to up to three stereo outputs. The unit can
also take three separate stereo or mono signals in, and switch them to a single stereo or
mono output.
WARRANTY
For information on the Rolls One Year Limited Warranty, and to register this
product, visit our web site at www.rolls.com
DESCRIPTION
Common Jacks: Stereo RCA’s or 1/8” Tip-Ring-Sleeve jacks for input/output and pass-
through connections.
A,B,C Jacks: Stereo RCA’s or Three 1/8” Tip-Ring-Sleeve jacks for input/output connec-
tions.
A,B,C Switch: Mechanical toggle switch - connects and disconnects the A,B,C jacks to
the Common jack(s).
CONNECTION
First, it must be stressed that the SS32 should
either be operated in Stereo, or Mono mode -
NOT both. Using this device with mono cabling
and stereo equipment could damage your stereo
equipment.
Since the SS32 is a passive device, connecting
a 1/8” mono (Tip-Sleeve) plug to either the Common, or A,B,C jacks - that jack’s ring con-
nection will be grounded. This means the stereo signal will be lost.
Therefore, you must fi rst determine whether you operating this unit in Stereo or Mono.
Refer to Figure 1 for the differences in Stereo and Mono 1/8” plugs.
Figure 1
SPECIFICATIONS
Connectors:
4 Stereo RCA jacks
4 1/8” Tip-Ring-Sleeve jacks
Switch: Triple pull / double throw toggle switch
Size: 4” W x 1” H x 3” D
Weight: 1 lbs.
6 75889 00320 8
SS32 Mini Route 3