Ruby Tech GS-2148L User Manual
Gs-2148l
GS-2148L
G
i
g
a
b
i
t
S
w
i
t
c
h
L2 Managed Switch
Gigabit Switch
GS-2148L:
48-Port GbE L2 Managed Switch with 4 SFP Dual Media
Key Features
Key Features
QoS with four priority queues
Enhancing Security, Traffic Flow
Classification and Prioritize by Powerful
ACL rule
Q-in-Q VLAN for performance &
security
DHCP Snooping assure the DHCP
security
802.1x Access Control improves
network security
802.1d Compatible & 802.1w Rapid
Spanning Tree
4 dual media ports for flexible fiber
connection
Broadcast/Multicast/unknown-unicast
Storm Control
Overview
GS-2148L, a 48-port Gigabit L2 Managed
Switch, is a standard switch that meets all
IEEE 802.3/u/x/z Gigabit, Fast Ethernet
specifications. The switch included 44-
Port 10/100/1000Mbps TP and 4-Port
Gigabit TP/SFP Fiber management
Ethernet switch. The switch can be
managed through RS-232 serial port via
directly connection, or through Ethernet
port using CLI or Web-based management
unit, associated with SNMP agent. With
the SNMP agent, the network administrator
can logon the switch to monitor, configure
and control each port's activity in a friendly
way. The overall network management is
enhanced and the network efficiency is
also improved to accommodate high
bandwidth applications. In addition, the
switch features comprehensive and useful
function such as QoS (Quality of Service),
Spanning Tree, VLAN, Port Trunking,
Bandwidth Control, Port Security, SNMP/
RMON, IGMP Snooping capability via the
intelligent software. It is suitable for both
metro-LAN and office application.
Technical Specifications
Technical Specifications
Standard compliance
---IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
---IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
---IEEE 802.3ab 1000Base-TX Ethernet(twisted-pair copper)
---IEEE 802.3z 1000Base-X Ethernet
---IEEE 802.3x flow control capability
---ANSI/IEEE 802.3 auto-negotiation
---IEEE 802.1q VLAN
RoHS Compliance
Subscriber Interface
---48 GbE ports with 4 combo ports
---Port 45,46,47,48 are Gigabit TP/SFP Fiber auto sense
---Auto-Negotiation and Auto-MDIX
---Backpressure flow control for half duplex.
---802.3x flow control for full duplex.
---Connector: 44 RJ-45 ports + 4 combo ports, RJ-45/SFP
Performance
Switching capacity
---Non-blocking switch fabric supports up to 48GbE ports
---8 K MAC addresses
---The maximum throughput is 96Gbps
---Jumbo frame support up to 16KB
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, 4094 max, up to 256 active VLANs
including static plus dynamic entry
---IEEE802.1q tag-base VLAN
---Flooding unknown vlan frame setting, can flood packet with some
vlan tag associated to a invalid/inactive vlan
---In tag-base VLAN, supports egress/ingress packet filter
---Q-in-Q is an efficient method for enabling Subscriber Aggregation
---Provide Management Vlan for managed policy
---Provide the multicast Vlan to reduce the multicast traffic
QoS
---Supports packet classification by each port or vlan ACL rule
---Supports four level priority queues and prioritized by Ethernet type,
vlan tag, IP, UDP, TCP and flow
---Supports priority in a Q-in-Q tag
---Priority remarking, DSCP and priority tag remarking, control the
tunnel quality exactly
Broadcast Storm
---Multicast/Broadcast/Unknown-Unicast Storm suppression.
Port Mirroring
---Support 1: N RX port mirroring
---Supports port sniffer function with 3 modes:
RUB
TECH
Networking & Communications
R