Ruby Tech IES-2310C - Manual

IES-2310C: Industrial 8-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media
Key Features Key Features
8-Port 10/100BaseT(X), 2-Port 1000
BaseTX/FX(SFP)(MM/SM, LC/BiDi)
Support IEEE802.3/802.3ab/802.3ad/
802.3u/802.3x/802.3z/802.1d/802.1p/
802.1q/802.1w
Support SNMP, RMON,IGMP,LACP,
GVRP,GARP,STP,RSTP,
R-Ring (Recover Time < 300ms) for
Ethernet Redundancy
Power Input: 24VDC (18~48V)
-10 C to 60 C operating temperature
DIN-Rail mounting ability
Alarm contact
Overview Overview
IES-2310C is an industrial Managed Fast
Ethernet switch that supports SNMP, Web
UI and CLI management interface and with
8 10/100Base-TX (RJ-45 connectors) and
2 Gigabit dual media (RJ-45/SFP) ports. It
is a standard switch that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet
specifications. In addition, the switch
implements the QoS (Quality of Service),
VLAN, Mac Filtering Policy, Port Mirror,
VLAN and full L2 protocols. It has a rich
feature set suitable for streaming VoIP,
video, and data traffics for multimedia
applications.
Moreover, for industrial automation
application, redundancy is an important
issue to ensure the network reliability,
IES-2310C provides R-Ring technology
to enable self-recover time in less than
300ms.
In this switch, Port 9, 10 support two
types of media --- TP and SFP Fiber
(LC, BiDi-LC...); both ports support
10/100/1000Mbps TP or 1000Mbps SFP
Fiber with auto-detected function.
1000Mbps SFP Fiber transceiver is used
for high-speed connection expansion.
IES-2310C
Technical Specifications Technical Specifications
Standard compliance
---IEEE 802.3 10Base-T
---IEEE 802.3u 100Base-TX
---IEEE 802.3x Flow Control Capability
---IEEE 802.3z 1000Base-X Ethernet
---IEEE 802.3ab 1000Base-TX
---ANSI/IEEE 802.3 Auto-negotiation
---IEEE 802.1q VLAN
---IEEE 802.1d Spanning Tree Protocol.
---IEEE 802.1w Rapid Spanning Trees
---IEEE 802.1x port-based network access control
---IEEE802.1p Class of Service
Subscriber Interface
---1-8 10/100Mbps Fast Ethernet ports.
---Port 9 and 10 are Gigabit TP/SFP Fiber auto sense
---Auto-Negotiation and Auto-MDIX
---Back pressure flow control for half duplex.
---Connector: 8 RJ-45 and 2 dual media, RJ-45/SFP
Performance
Switching capacity:
--- Non-blocking switch fabric supports up to 8FE + 2GbE ports
8 K MAC addresses
---
256K packet buffer and 128K control memory ---
VSM(Virtual Stacking Management)
--- Supports 16 devices stacking
Multiple switches can be managed via one IP address, just like software
---
stacking
VLAN
--- Supports SVL/IVL configuration to meet your VLAN requirement
Port-base VLAN
---
IEEE802.1q tag-base VLAN, 4094 max, up to 256 active VLANs including ---
static plus dynamic entry
Flooding unknown VLAN frame setting, can flood packet with some VLAN ---
tag associated to a invalid/inactive VLAN
In tag-base VLAN, supports egress/ingress packet filter ---
Q-in-Q is an efficient method for enabling Subscriber Aggregation ---
QoS
--- Port Based (VIP Port), 802.1p , TOS and DiffServ.(IPv4/IPv6) based QoS
packet classification
---Supports four level priority queues to prioritize in-bound and out-bound
traffic
---Supports two scheduling, WRR and Strict
---Supports priority in a Q-in-Q tag
I
n
d
u
s
t
r
i
a
l
E
t
h
e
r
n
e
t
Industrial Ethernet
Fast Ethernet Switch
RUB
TECH
Networking & Communications
R