Runco VP-5000VHDa - Manual (Page 18)

Controls and Functions
6 Vidikron PlasmaView VHD Installation/Operation Manual
PRE
L
IMINAR
Y
1. DISPLAY STAND
Optional accessory for table-top installations.
2. POWER BUTTON
Connects or disconnects the display panel from the AC power source.
3. STANDBY/ON INDICATOR
- Lights green to indicate normal operation;
- Lights red to indicate that the PlasmaView VHD is in standby mode.
4. REMOTE CONTROL SENSOR
Receives the signals from the remote control.
Connectors Figure 2-2 shows the rear-panel connector locations on the PlasmaView VHD.
Figure 2-2. PlasmaView VHD Rear Panel
➤
SERIAL PC IN
AUDIO
SLOT1 SLOT3
P R /C R /R P B /C B /B Y/G AUDIO R L
COMPONENT/RGB IN
SLOT2
AV IN
A B
VP-5000VHD
1 2 3 4 5
VP-6500VHD
6
6
NOTE: Some PlasmaView VHD
models have a DVI-D input
board installed in SLOT 2.