RedMax US-1 EBZ5100Q - Manual (Page 12)

■ ADJUSTING IDLE SPEED
• The idling speed is set for 2200 rpm at
the factory. If it is necessary to adjust
the idle speed, use the adjustment
screw on the top side of carburetor.
(1) Idling Adjustment Screw
■ STOPPING ENGINE
1. Move the throttle lever to the idling
position and run the engine for a half
minute.
2. Shift the ignition switch to “STOP(O)”
position.
(1) Ignition Switch
If the engine won’t stop when setting
the ignition switch to the stop position,
close the choke lever and stop the
engine.
In this case, please repair the machine
at your nealest servicing dealer. (F12)
(1) Choke Lever
(2) OPEN
(3) CLOSE
NOTE
US-12
EBZ5100Q
■ ADJUSTING THE SHOULDER
STRAPS
Tightening:
• Pull on the end of the strap.
Loosening:
• Pull up on the lower portion of the
buckle with a finger and slide the end of
the strap back up to the buckle.
■ EMERGENCY REMOVAL
• In an emergency, pull up on the lower
portion of both strap buckles to loosen
the straps. Move yourself away from
the unit.
(1)
F10
“ I ”
“O”
(1)
F11
8. Operation
F9
F7
F8
F12