Roland JV-1010 - Manual (Page 26)

26
Choosing and Playing Patches
Playing Notes from a MIDI Keyboard
The JV-1010 receives and plays MIDI data from other instruments. When
doing this, the transmitting instrument (the MIDI keyboard or the like) and
the JV-1010 must be set to the same MIDI channel.
Here we’ll play sounds with both channels set to 1 .
fig.1-13
1
Connect a MIDI keyboard to the JV-1010 (p. 18).
2
Set the transmit channel for the MIDI keyboard (the
transmitting instrument) to
1 .
For information on how to make the settings, refer to the owner’s manual
for the MIDI keyboard.
3
Press the VALUE knob to choose the Patch mode ( PATCH ).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times, until the PATCH indicator lights up.
4
Turn the PART knob and choose 1 .
Here, 1 becomes the JV-1010’s receive channel.
5
Finger some keys on the MIDI keyboard to play a few notes.
When MIDI data is received, the MIDI indicator lights up.
fig.1-14
4 3