Roland JV-1010 - Manual (Page 44)

44
Editing Using Only the JV-1010
Making Part Settings (PART)
fig.1-30
Now try changing the level setting ( Level ) for PART 2 in Performance
mode.
fig.1-30a
1
Press the VALUE knob to choose the Performance mode
(
PERFORM ).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times, until the PERFORM indicator lights up.
2
While holding down the VOLUME knob, press the VALUE
knob.
Switch to the Edit mode.
3
Turn the CATEGORY/BANK knob to choose USER ( Level ).
4
Turn the PART knob and choose 2 .
In Edit mode, you can select USER ( Level ) with the CATEGORY/BANK
knob to change the volume level setting for each part.
3 2,6 1,5 4
When in the Patch mode,
you can’t enter the Edit
mode.
For more information
about the CATEGORY/
BANK knob’s other
functions in Edit mode,
refer to the
EDIT
PARAMETER SELECT
chart on the JV-1010’s top
panel.