2 install adapter, 1 cardbus adapter- rnx-g200, 2 .2 pci adapter- rnx-g300(e) – Rosewill RNX-G200 User Manual
Page 7
RNX-G100 / RNX-G200 / RNX-G300(E)
7
3.2 Install Adapter
3.2.1
Cardbus Adapter- RNX-G200
z Power on your notebook, let the operating system boot up completely, and log in as needed.
z Hold the adapter with the LOGO facing up and insert it into a Cardbus slot.
Figure 3-1
z If the Found New Hardware Wizard displays, choose Install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
Figure 3-2
3.2 .2 PCI Adapter- RNX-G300(E)
z Open your PC case and locate an available PCI on the motherboard.
z Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s
contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the
adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting