Rosewill RNX-G200 - Manual (Page 8)

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual
8
screw. Then close your PC.
z Attach the external antenna to the adapter’s antenna port.
z Power on the PC.
Figure 3-3
z If the Found New Hardware Wizard displays, choose install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
3.2.3 USB Adapter - RNX-G100
z Power on your PC, let the operating system boot up completely, and log in as needed.
z Hold the adapter and insert it into a USB slot.
z If the Found New Hardware Wizard displays, choose install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
Figure 3-4
You have now completed the driver and hardware installation for the Adapter.