Replacing the fusing unit – Ricoh Aficio AP400 User Manual
Page 14
Replace Maintenance Kit
10
1
Replacing the Fusing Unit
R CAUTION:
AAAA
If the rear cover is attached to the
printer, remove it.
Note
❒ Proceed to step
B
if the optional
Duplex Unit was removed in
step
A
, "Replacing the Paper
Feed Rollers".
A Place a finger in the printer's
rear cover finger hole (upper
center) and pull it open.
B Remove the rear cover in a hor-
izontal direction.
BBBB
Lift the lock levers of the fusing
unit as shown in the illustration.
CCCC
Pull the fusing unit out.
DDDD
Pull out the pins on both sides of
the new fusing unit.
• The fusing unit becomes very
hot. When installing the new fus-
ing unit, turn off the printer and
wait about an hour. After that, in-
stall the new fusing unit. Not
waiting for the unit to cool down
can result in a burn.
ZKEX210E
ZKEX220E
ZKEX222E
ZKEX223E
ZKEM010E
CassisP1GBmaintenance-F2_FM.book Page 10 Friday, May 23, 2003 10:04 AM