Ricoh Aficio AP400 - Manual (Page 8)

Replace Maintenance Kit
4
1
Preparing to replace the parts
You should replace all the parts included in Maintenance Kit at the same time.
Be sure to replace them in the following order:
AAAA
Check the contents of the box for the following items:
• Friction pad
• Paper feed roller
• Transfer roller
• Fusing Unit
• Gloves
BBBB
Confirm that the followings are true:
• The power switch is turned off.
• The power cord is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
Important
❒ Wait about an hour after the printer is turned off to allow internal parts to
cool down before replacing the Maintenance Kit.
Transfer roller 1 pc ⇒ p.8 “Replacing the Transfer
Roller”
Gloves 1 pair
Fusing Unit 1 pc ⇒ p.10 “Replacing the Fusing
Unit”.
Description Quantity
CassisP1GBmaintenance-F2_FM.book Page 4 Friday, May 23, 2003 10:04 AM