Rear panel, 7 panel descriptions – Roland GW-7 User Manual

Page 7

Advertising
background image

7

Panel Descriptions

16.

FUNCTION button

This button takes you to the settings screen for various
parameters.

To raise the pitch of the keyboard tone in steps of one octave,
hold down [SHIFT] and press [FUNCTION]. (p. 11)

17.

KEYBOARD section

Use these buttons to switch the keyboard mode. (p. 9, p. 11)

18.

MODE section

Use these buttons to switch between Tone, Style, Performance,
and Song modes.

19.

USB button

The GW-7 can exchange music style data or song files with your
computer via a USB connection. (p. 24)

20.

[PIANO]–[DRUMS]

Use these buttons to select tones by category. (p. 9–11)

21.

FAVORITE button

Use this button to access favorite tones. (p. 11)

22.

Bender/Modulation lever

You can raise or lower the pitch by moving this lever to the left
or right. Push the lever away from yourself to apply modulation
(normally vibrato) to the sound. (p. 17)

1.

USB connector

Use a USB cable to connect the GW-7 to your computer via this
connector. (p. 24)

2.

MIDI OUT/IN connectors

Connect MIDI devices to these connectors. (p. 26)

3.

CONTROL PEDAL jack

Connect a separately available pedal switch (Roland DP Series),
a separately available foot switch (BOSS FS-5U) or a separately
available expression pedal (Roland EV-5) to this jack. (p. 8, p.
17)

4.

HOLD PEDAL jack

Connect a separately available pedal switch (Roland DP Series)
to this jack. (p. 8)

5.

OUTPUT R/L (MONO) jacks

Connect your cassette deck, power amp, audio amp, keyboard
amp, monitor speakers, etc., to these jacks. (p. 8)

6.

PHONES jack

Connect a separately available pair of headphones to this jack.
Sound will be output from the OUTPUT jacks even if you
connect headphones.

7.

Cord hook

Use this to secure the AC adaptor cord. (p. 9)

8.

DC IN jack

Connect the included AC adaptor here. (p. 9)

9.

POWER switch

This turns the power on/off. (p. 9)

Rear Panel

GW-7_e.book 7 ページ 2005年2月16日 水曜日 午前8時48分

Advertising