RIDGID TS3650 - Manual (Page 70)

70
Lubrication
RIDGID Recommends the Following Accessories
The saw motor bearings have been
packed at the factory with proper lubri-
cant. See motor label for lubrication
instructions. The following parts
should be oiled occasionally with SAE
no. 20 or no. 30 engine oil.
1. Tilt screw threads and pivot nut.
(First clean with a solvent
recommended for gum and pitch
removal.)
2. Elevation screw threads and pivot
nuts. (First clean with a solvent
recommended for gum and pitch
removal).
3. Cradle bearing points.
4. Bearing points in blade guard and
miter gauge.
2
3
3
1
Item SKU No.
Miter Gauge Hold Down . . .AC1022
Molding/Dado Insert for 8" . .AC1040
Zero Clearance Insert . . . . .AC1045
Flip Top Portable
Work Support . . . . . . . . .AC9933
Do not use any accessory unless you
have received and read complete
instructions for its use.
WARNING: Use only accessories
recommended for this saw.
Using other accessories may be
dangerous.
.SP6498 Belt Drive Saw 05/03 7/15/03 7:05 AM Page 70