Ricoh DIGITAL CAMERA GR - Manual (Page 147)

137
d
o
wnl
o
ading
i
ma
ges
to
y
our
c
om
Puter
Installing Software
Install the supplied software to your computer.
Caution
• Before proceeding, confirm that Mass Storage is selected for
USB Connection Type in the setup menu (page 133).
1
Turn the camera power off, and pull the SD memo-
ry card out of the camera.
With SD memory card in the camera, the software
cannot be installed.
2
Connect the supplied USB cable to the computer.
3
Connect the USB cable to the
common terminal for USB
port/AV output of the cam-
era.
The camera turns on automati-
cally when a connection is established.
RICOHDCI(E:) screen is displayed (E indicates the
drive name).
4
Click Start the digital camera
software installer, and then
click the OK button.
Digital camera software in-
staller screen appears.