Radio Shack TAD-759 - Manual (Page 17)

17
RECORDING A MEMO
A memo is a message you can record at
the TAD, without having to call in on the
phone. The TAD-759 can record a
memo of up to 60 seconds long.
To record a memo, hold down MEMO .
The TAD beeps, and the display begins
counting down from 60 seconds. Speak
in a normal voice about 8 inches from
the front of the TAD. When you finish,
release
MEMO .
The memo is stored with the incoming
messages. To hear the memo, simply
play back your messages.
Note: If the TAD’s memory is full ( FL
and the number of messages alternately
appear on the display), you must erase
some messages before you can record
a memo.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
The TAD-759’s remote operation securi-
ty code is preset to 759. Follow these
steps to change the code.
Notes:
• Be sure to set each digit within 8
seconds. Otherwise, you must start
over at Step 1.
• If AC power fails and the backup
battery becomes weak, the remote
operation security code automati-
cally resets to 759.
1. Hold down CODE for about 2 sec-
onds. The TAD beeps, and the first
digit of the preset code flashes on
the display.
2. Press SKIP or REPEAT to set the first
digit, then press STOP . The TAD
beeps, and the second digit appears
and flashes.
3. Press SKIP or REPEAT to set the
second digit, then press STOP . The
TAD beeps, and the third digit
appears and flashes.
4. Press SKIP or REPEAT to set the
third digit, then press STOP . The TAD
beeps and shows the new security
code in sequence.
To see the currently set code at any
time, press
CODE .