Radio Shack PLD35MU User Manual

Page 8

Advertising
background image

1.10 Description of Wires Harmness

YELLOW

MEMORY B+

BLACK(GND)

IGNITION SWITCH

BLUE AUTO ANT

GREEN

WOOFER LINE OUT(optional)

RED

FRONT

REAR

RIGHT

SP

FRONT

WHITE

WHITE / BLACK

GREEN / BLACK

VIOLET / BLACK

GRAY / BLACK

GRAY

VIOLET

GREEN

REAR

LEFT

SP

RED R

WHITE L

RCA LINE OUT

FUSED
FILTER
BOX 1A

& 10 A

FUSES

WIRING CONNECTING SOCKET

WIRING CONNECTING PLUG

1.9 Description of the Rear Cabinet

Connecting the parking brake line to the parking brake s ystem built in the car

Parking brake

Parking brake switch
(inside the car)

Parking brake line(light blue)

To metallic body or chassis of the car

NOTES:
1. Only speakers with 4 ohms impedance may be used.
2. Ensure that the blue auto antenna cable does not make contact

with any ground connection.

Reversal line Orange

WIRING CONNECTING SOCKET

Parking Line Brown

GRAY

GRAY

VIDEO OUT

YELLOW

YELLOW

Note: 1. after connecting the Parking Line, the video on the small monitor of the front panel will be display only after braking the car.

2. Use the clip end of a Ground Line provided by manufacturer to connect the Fixing Screw Bolt, use another end of the Ground

Line to connect the negative pole of the power source. Otherwise, the video on screen maybe flashes.

Fixing Screw Bolt

5

This item is for selecting the language of the SYSTEM MENU and all operating
prompt interface displayed during playback.

This item is for selecting a audio language.

This item is for selecting a subtitle language.

This item is for selecting a disc menu language.

5

there is only ANALOG mode, i.e. SPDIF/OFF, not optional.

It is for selecting your desired basic music tone(from low to high).

5

.19.2 LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

.l9.3 AUDIO SETUP

AUDIO OUT

KEY

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG
MENU LANG

EXIT SETUP

AUDIO SETUP

AUDIO OUT

KEY

EXIT SETUP

VIDEO SETUP

BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS

EXIT SETUP

.l9.4 VIDEO SETUP

BRIGHTNESS

CONTRAST

It is for adjusting the brightness of the video output.

It is for adjusting the contrast of the video output.

PDF created with FinePrint pdfFactory trial version

http://www.pdffactory.com

Advertising