RCA CDS6300 - Manual (Page 34)

Using the Camera’s Features
32 Chapter 2
FLASH
TIMER
MODE ON
S ET UP
V IE W
OFF
Power dial
MENU
QUICK REVIEW
DISPLAY
Navigation
button
A F Z o o m 5.4 -16.2mm 1:2
.8-4 .4
Self timer indicator
Self Timer
The camera has a self timer so that you can delay
when the picture is taken by a few seconds. It’s
especially useful when using a tripod.
Set it to 3 seconds to steady any vibration caused by
touching the camera right before you take a picture,
or to 10 seconds to allow you time to include
yourself in the picture.
You can use the self-timer indicator to gauge how
much time is left before the picture is taken. For the
3 second mode, it flashes once every half second.
For th 10 second mode, it flashes once a second for
7 seconds and then once every half second for the
remaining three seconds.
1. Set the Power dial to SETUP. (The Setup menu
appears and LCD BRIGHT is highlighted.)
2. Use the Navigation button to scroll to SELF
TIMER.
3. Use the Navigation button arrows to adjust the
delay. The on-screen arrows indicate which
arrows you can use on the Navigation button.
4. When finished, use the Navigation button to
scroll to the next setting or set the Power dial to
the desired mode.
Using the Self Timer
1.
Press the TIMER button. (The timer icon
appears on the Status screen.)
2. When you are ready to use the self timer, press
the shutter button.
TIMER button