Ricoh Aficio 3025 - Manual (Page 48)

Copying
38
2
C
Make sure [Size Magnificatn] is high-
lighted.
D
Enter the length of the original
using the number keys, and then
press [#].
Note
❒ You can enter sizes within the
following ranges:
E
Enter the length of the copy using
the number keys, and then press
[#]
.
Note
❒ To change the length after press-
ing [#], select [Original] or [Copy],
and then enter the length.
F
Press [OK] twice.
G
Place original, and then press the
{Start} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
a: Horizontal ratio
b: Vertical ratio
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge]
, and then adjust it further,
using [n] or [o].
A
Press [Reduce/Enlarge].
B
Press [Specifd. Ratio].
C
Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the number
keys, and then press [#].
C Press [Vertical].
D Enter the ratio using the number
keys, and then press [#].
E Press [OK].
To specify a ratio using [n] and
[o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n] or
[o] .
Note
❒ Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
[n]
or [o] changes it in in-
crements of 10%.
Metric
version 1–999 mm
(increments of 1 mm)
Inch
version 0.1"–99.9"
(increments of 0.1")
CP2P01EE
RuC4_AE_Copy-F_FM_forPaper.book Page 38 Thursday, April 14, 2005 1:21 PM