Ricoh Aficio 3025 - Manual (Page 49)

Copier Functions
39
2
❒ If you have incorrectly en-
tered the ratio, readjust it us-
ing [n] or [o].
D Press [Vertical].
E Adjust the ratio using [n] or
[o] .
F Press [OK].
D
Press [OK].
E
Place originals, and then press the
{Start} key.
Directional Size Magnification
(mm)
A suitable reproduction ratios is auto-
matically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
1. Horizontal original size
2. Vertical original size
3. Horizontal copy size
4. Vertical copy size
Preparation
Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown.
Note
❒ You can enter sizes within the fol-
lowing ranges:
A
Press [Reduce/Enlarge].
B
Press [Specifd. Ratio].
C
Press [Dir. Size Mag mm].
D
Enter the horizontal size of the
original using the number keys,
and then press [#].
E
Enter the horizontal size of the
copy using the number keys, and
then press [#].
F
Enter the vertical size of the origi-
nal using the number keys, and
then press [#].
G
Enter the vertical size of the copy
using the number keys, and then
press [#].
Note
❒ To change a length, press the
key you want to change, and
then enter the new value.
H
Press [OK] twice.
I
Place the originals, and then press
the {Start} key.
CP2M01EE
Metric
version Vertical: 1–999 mm
(increments of 1 mm)
Horizontal: 1–9999 mm
(increments of 1 mm)
Inch
version 0.1"–99.9" (increments of 0.1")
RuC4_AE_Copy-F_FM_forPaper.book Page 39 Thursday, April 14, 2005 1:21 PM