RCA T13017WH - Manual (Page 14)

12
Using the Playback Features
Pause
This feature pauses the tape in action and allows you to
examine the details of the scene. Pause works best for
tapes recorded in the SLP speed.
1 . Press PAUSE on the remote during playback to pause
the action.
The TV/VCR will automatically switch from pause to
stop after a few minutes to prevent tape wear.
2 . Press PAUSE or PLAY to return to playback.
Picture Search
You can visually search a picture during playback.
Sound is turned off during picture search. The picture is
best for tapes recorded in the SLP speed.
1 . During playback, press FF to search forward or REW
to search in reverse.
If you start searching within five seconds of a
previous search, the search speed will be slower for
approximately eight seconds.
2. Press FF or REW again, or press PLAY to return to
playback.
Automatic Tracking
The TV/VCR has automatic tracking which adjusts the
picture when playing a tape that was recorded on another
VCR. Automatic tracking is turned on whenever a tape is
inserted or the TV/VCR’s power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking
on a tape recorded on a different VCR or camcorder.
Tracking is used when playing a tape. It has no effect
during recording.
• When streaks or snow appear in the picture during
normal playback or slow motion, press TRACK up or
down on the remote or CH up or down on the TV/VCR
for the best possible picture.
• To turn automatic tracking back on, press and hold
both of the CH buttons on the front of the TV/VCR.
Playing a Tape
CHAN
REC
REW
STOP
PLAY
PAUSE
FF
MENU POWER
DISPLAY
CLEAR
MUTE
PREV CH
1
2
3
4
5
6
7
8
0
9
RESET
TRACK
TRACK
SPEED
V
O
L
V
O
L
CHAN