RedMax EDG2300 - Manual (Page 9)

Parts Location & Specifications
Setup
1. Attach the grip and the drill chuck to the
power unit securely by hand.
2. Insert the drill into the chuck, and tighten
firmly.
MODEL EDG2300
Overall Dimensions (LxWxH) (in) 14.3x12.1x9.1 (357x302x227)
Dry Weight (lbs) 10.6 (5.3kg)
Transmission Automatic centrifugal clutch and reduction gears
Reduction Ratio 10 : 1
Recommended drill size Dia. 1/2in.(12.5mm)
Engine Type Air cooled 2-cycle gasoline engine
Displacement cc (cu. in) 22.5 (1.37)
Max. Output kW (HP) 0.87 (1.18) at 8000 rpm
Fuel Mixture (Gasoline 32 : 2-cycle oil 1)
Fuel Tank Capacity pints 1.21
Carburetor Diaphragm type, Rotary Valve
Ignition System Transistor controlled flywheel magneto
Spark Plug CHAMPION RCJ-6Y
Starting Recoil starter
Stopping Primary circuit short-circuiting
Standard Accessory Service tool kit
Specifications are subject to change without notice.
Stop switch
Throttle lever
Rear grip
Starter grip
Air cleaner
Fuel cap
Front grip
Reduction unit
Chuck
Drill
Spark plug Muffer
❲ 9 ❳