Powering your cb radio, Using the aa battery case – Radio Shack 21-1679 User Manual

Page 5

Advertising
background image

5

#AUTIONS
• To avoid injury, do not connect the AC charger to a ceiling

outlet. After charging, disconnect the AC charger.

• You must use a Class 2 power supply that provides 16V DC

and delivers at least 200mA. The barrel plug’s center must
BEPOSITIVEANDTHEBARRELPLUGMUSTÞTTHE#"mS

CHG jack.

4HESUPPLIEDØ#CHARGERMEETSTHESESPECIÞCATIONS5SING
ANADAPTERTHATDOESNOTMEETTHESESPECIÞCATIONSCOULD

damage the CB radio or adapter.

• Always connect the AC charger to the battery pack before

you connect it to an AC outlet, and disconnect the AC

charger from the AC outlet before you disconnect it from the

battery pack.

• Overcharging your battery pack could shorten its life.
• Do not charge your battery pack at temperatures below 14°F

(–10°C) or above 131°F (55°C).

• You cannot recharge the Ni-MH battery pack using DC

power.

Recycle Rechargeable Batteries
Placing rechargeable batteries in the trash can be

harmful to the environment. Instead, recycle old

rechargeable batteries at your local

RadioShack store free of

charge.

RadioShack participates in the RBRC

©

battery recycling

program, and is committed to preserving the environment and

conserving natural resources. Call 1-800-THE-SHACK (1-800-

843-7422) for more information.

Using the AA Battery Case

1. Turn off the CB radio if it is on.
2. Pull the halves of the case apart to

open it. Insert eight AA batteries,

matching the polarity marks (+ and –).

Snap the halves of the case together

to close it.

Powering Your CB Radio

Advertising
This manual is related to the following products: