Radio Shack 43-3872 - Manual (Page 41)

Phonebook
41
Storing Caller ID Messages in the
Phonebook
Messages shown in the Caller ID list (see
page 47) can be stored in the phonebook.
The phone number and name of the party on
the Caller ID list can be stored in memory. Ô
1. When the phone is in standby mode,
select the Caller ID message to be
stored.
2. Press SELECT/ (or the STORE soft
key on the base). Store/Edit Name
appears.
If the Caller ID message is already
stored in memory, you will hear a beep
and
This data is already
stored!! appears. The number will
not be stored.
3. To complete the setting, follow the
steps 4-9 in
“Storing and Editing Phone
Numbers, Names, Distinctive Rings
and Speed Dial” on Page 38
.
Storing a Redial Record
1. With the phone in standby mode, press
REDIAL/PAUSE .
2. Press REDIAL/PAUSE repeatedly to
display the number to be stored.
3. Press SELECT/ (or the STORE soft
key on the base). Store/Edit Name
appears.
4. To complete the setting, follow the
steps 4-9 in
“Storing and Editing Phone
Numbers, Names, Distinctive Rings
and Speed Dial” on Page 38
.
Ô
NOTES
Ô
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information is
stored.
• If the Caller ID message
was received as a
private/unknown
number, or the message
does not have the
number, you cannot
store the message in the
phonebook. If it was
received as private/
unknown name, the
message will be stored
as <No Name>.
• Even if all 100 memory
locations are full, the
message will be stored
in the phonebook.
However, the message
will be erased from the
Caller ID list.
43-3880.book Page 41 Monday, June 28, 2004 2:07 PM