Radio Shack 43-3872 - Manual (Page 69)

The Int
egrated Answering
Device
69
entered within two seconds. You may
select a command from the following
chart:
5. After the command has finished, you
hear intermittent beeps indicating that
the system is in the command waiting
mode. You may enter another
command at this time from the chart
above.
6. When you are finished, hang up to exit
the system. The answering system
automatically returns to standby.
Command Function
0 then 1 Repeat a Message Ô
0 then 2 Playing incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation
Ô
0 then 6 Answering System On
0 then 7 Memo Record/Stop
Ô
0 then 8 Greeting Message Record/Stop
Ô
0 then 9 Answer System Off
1 then 0 Help Guidance
Ô
NOTES
Ô
• For Repeat a Message
function, press 0 then 1
within about four
seconds to repeat the
previous message, or
press 0 then 1 after
about four seconds to
repeat the current
message.
• For Memo Record and
Greeting Message
Record function, the first
time you enter the
corresponding
command, it starts the
Recording function. If
you want to stop the
recording, enter the
command again.
43-3880.book Page 69 Monday, June 28, 2004 2:07 PM