Ricoh A251 - Manual (Page 110)

25
COPYING ONTO OTHER MEDIA
To copy onto vellum (translucent or tracing paper) or film, select the Copy Media function to match
the paper type (see below).
This list is not complete. If you are not sure of what type of paper you have, check the label on the
paper package.
1 Press the Copy Media key to turn on the
“Vellum” or “Film” indicator.
The “Wait” indicator goes on and either the
“Vellum” or “Film” indicator lights.
2 When the “Wait” indicator goes off and the
“Ready” indicator goes on, the copier enters
the ready condition.
Notes
❐ Even if you have set the Copy Media function correctly, creasing might occur depending on
temperature or humidity. If this happens, adjust the fusing temperature manually. See the next
page.
3. COPY SETTINGS
Type of paper Media setting
Plain paper Both indicators off
Film Film indicator on
Vellum Vellum indicator on
Heavy paper Vellum indicator on
Thin paper No indicator, or film, if
necessary.
Copy Media Lighter Darker Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Wait
Vellum
Film
Lighter Copy
Set
Original Energy
Saver