Ricoh A251 - Manual (Page 36)

28
1 Press the Copy Media key to turn on the
“Vellum” or “Film” indicator that you want.
2 Hold down the Copy Media key for at least 3
seconds.
The “Lighter Copy” display will show the
current fusing temperature. The unlit indicator
shows the current temperature.
3 Press the Lighter key to decrease the tempera-
ture, and press the Darker key to increase the
temperature.
The number of temperature levels available
depends on the paper type:
Plain paper : 1234567
Vellum : 1234
Film : 1234
4 After you have finished the setting, press the Copy Media key.
5 Choose any copy settings you require, then start copying.
Notes
❐ The new fusing temperature for the selected paper type is cleared when you press the Clear
Modes key or turn off the main switch.
Copy Media Lighter Darker Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper RF
Select
Wait
Vellum
Film
Lighter Copy
Set
Original Energy
Saver
Adjusting the Fusing Temperature Manually